Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment use:
Plastic pendulum impact testing machine The impact resistance of non-metallic materials such as plastic, nylon, rubber, glass fiber reinforced plastic, composite plastic pipes, electrical insulation materials under dynamic load is tested。According to the display mode, the machine can be divided into liquid crystal type, microcomputer type, instrument three ways, that is, can do simple beam test, but also can do cantilever beam test and tensile impact test, support adjustment and replacement is convenient, high work efficiency。
Meet the criteria:
1. GB/T 1043 "Rigid plastic simple support beam impact test method"
2. GB/T 1843 "Plastic cantilever beam impact test method"
3. JB/T 8761 "Plastic Cantilever Impact Testing Machine"
4. JB/T 8762 "Plastic Simply supported beam Impact Testing Machine"
5. ISO 179 Plastics - Determination of impact strength of simply supported beams
6. ISO 180 Plastics - Determination of impact strength of cantilever beams
7. ASTM D256 ASTM D6110
Technical parameters:
型号 | PIT501J | ||||
Maximum impact energy (J) | 50 (determined by optional pendulum) | ||||
Optional simply supported beam pendulum energy (J) | 1,2,4, 7.5,15,25,50 | ||||
Optional Cantilever pendulum Energy (J) | 2.75,5.5,11,22 | ||||
Optional draw pendulum Energy (J) | 7.5,15,25 | ||||
Simply supported beam | Swing length (mm) | 230 (pendulum energy ≤4J), 395 | |||
Impact velocity (m/s) | 2.9 (pendulum energy ≤4J), 3.8 | ||||
Blade Angle (°) | 30±1 | ||||
Blade radius (mm) | 2±0.5 | ||||
Support fillet radius (mm) | 1±0.1 | ||||
Standard support front Angle (°) | 5±1 | ||||
Standard support rear Angle (°) | 10±1 | ||||
Standard support span (mm) | 40、60、62、70 | ||||
Cantilever beam | Swing length (mm) | 335 | |||
Impact velocity (m/s) | 3.5 | ||||
Blade Angle (°) | 75 | ||||
Blade radius (mm) | 0.8±0.2 | ||||
Blade front Angle (°) | 5 | ||||
Blade back Angle (°) | 10 | ||||
Clamp mouth fillet (mm) | 0.2±0.1 | ||||
Tensile impact | Tensile impact pendulum length Pendulum length (mm) | 395 | |||
Impact velocity (m/s) | 3.8 | ||||
T-quality (g) | 60,120 | ||||
Pendulum pre-elevation (°) | 150 | ||||
Angular resolution (°) | 0.045 | ||||
Machine weight (kg) | 140 | ||||
电源 | AC 220V±10% 50Hz 0.3kW | ||||
Overall dimensions (mm) | 1000 x 470 x 780 |
This series of testing machine is used to test the impact resistance of non-metallic materials such as rubber, glass fiber reinforced plastic, composite plastic pipes and electrical insulation materials under dynamic load。Yichun City construction materials testing center used the equipment。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763